Skip to main content

Advertisement

Log in

On the calculation of fuel savings through lightweight design in automotive life cycle assessments

  • DESIGN FOR ENVIRONMENT
  • Published:
The International Journal of Life Cycle Assessment Aims and scope Submit manuscript

A Correction to this article was published on 02 May 2018

Abstract

Background, aim, and scope

Lightweight design is a common means of reducing a passenger car's fuel consumption. In order to calculate the resulting fuel savings, one has to estimate the total energy that is needed to move a certain weight over a defined distance in a distinct way, and express this energy in liter of gasoline or diesel. This can be accomplished by the so-called fuel reduction value (FRV) and based on a standardized driving cycle, e.g., the New European Driving Cycle (NEDC). The aim of this paper is to explain the theoretical background of the calculation of fuel savings in automotive lightweight life cycle assessments (LCAs) of internal combustion engine (ICE) vehicles in greater detail than it has been done before, to describe the resulting factors and their different applications, and to point out some notable particularities that need to be taken into account when conducting this type of LCA study.

Materials and methods

The first part of the paper explains the theoretical background of the FRV based on physical correlations and simulations. Based on these findings, its application in the context of automotive LCAs is described. The respective characteristics and preconditions are explained in detail.

Results

It is shown that for LCAs that deal with automotive parts or assemblies, it is not permissible to multiply their respective net weight by the FRV under the assumption that the vehicle's performance remains unchanged. However, the consideration of secondary lightweight effects concerning engine displacement or gear ratio is only possible under this assumption. This entails a significantly higher FRV, but in turn only allows for the calculation of the net fuel reduction, which is zero for the reference part and carries a negative sign for all lightweight design options. In practice, both FRV (0.12 and 0.28 l/(100 km*100 kg) for diesel vehicles resp. 0.15 and 0.35 l/(100 km*100 kg) for gasoline vehicles) are equally likely in case that no comprehensive information is available about whether a weight-induced power train adaptation will take place or not. This approach stresses the decision makers' responsibility to ensure such measures.

Discussion

It appears to be indicated from a scientific point of view to include power train adaptations in automotive lightweight LCA studies in order to preserve functional equality in terms of the vehicle's driving performance. Yet, in practice this adaptation will most likely not take place if the weight difference is rather small. If there is no reliable information available that a weight-induced power train adaptation is guaranteed to take place, then a scenario without power train adaptation should be presented to the decision makers as well in form of an equally probable best and worst case.

Conclusions

It has been shown that the fuel consumption in order to move a mass of 100 kg over 100 km can be obtained based on the NEDC driving cycle and the differential efficiency of gasoline and diesel engines. If possible secondary measures are taken into account (gear ratio and engine displacement) the resulting values can be augmented significantly. It has also been shown that it is advisable to utilize mass differences rather than mass ratios when calculating the lightweight effect on fuel consumption during the use stage. This implies that the resulting fuel saving of a lightweight component compared to the reference component carries a negative sign, while a lightweight vehicle's fuel consumption is positive.

Recommendations and perspectives

It is strongly recommended to follow the proposed calculation procedure in future automotive lightweight studies. The authors further recommend the use of both FRV (with and without secondary measures) and the appropriate and explicit communication of the resulting implications.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3

Similar content being viewed by others

Notes

  1. named after Peter William Willans (1851–1892), inventor of the Willans high-speed steam engine

  2. estimate for manual and dual-clutch gearboxes such as the Volkswagen DSG®

  3. The term “component” refers to single parts (e.g. a fender) as well as to assemblies (e.g., a seat).

References

  • Cooper JS (2003) Specifying functional units and reference flows for comparable alternatives. Int J Life Cycle Assess 8:337–349

    Article  Google Scholar 

  • DaimlerChrysler AG (2007) Umwelt-Zertifikat Mercedes C-Klasse. DaimlerChrysler AG / Mercedes Car Group, Stuttgart

    Google Scholar 

  • Eberle R (2000) Methodik zur ganzheitlichen Bilanzierung im Automobilbau. Technische Universität Berlin (TU), Berlin

    Google Scholar 

  • European Economic Community (1970) Council Directive 70/220/EEC of 20 March 1970 on the approximation of the laws of the Member States on measures to be taken against air pollution by emissions from motor vehicles

  • European Economic Community (1980) Council Directive 80/1268/EEC of 16 December 1980 on the approximation of the laws of the Member States relating to the fuel consumption of motor vehicles

  • European Union (2004) Directive 2004/3/EC of the European Parliament and of the Council of 11 February 2004 amending Council Directives 70/156/EEC and 80/1268/EEC as regards the measurement of carbon dioxide emissions and fuel consumption of N1 vehicles

  • Finkbeiner M, Inaba A, Tan R, Christiansen K, Klüppel H-J (2006) The New International Standards for Life Cycle Assessment: ISO 14040 and ISO 14044. Int J Life Cycle Assess 11:80–85

    Article  Google Scholar 

  • International Organization for Standardization (2006a) ISO 14040: environmental management—life cycle assessment—principles and framework. International Organization for Standardization (ISO), Geneva

    Google Scholar 

  • International Organization for Standardization (2006b) ISO 14044: environmental management—life cycle assessment—requirements and guidelines. International Organization for Standardization (ISO), Geneva

    Google Scholar 

  • Keoleian GA, Spatari S, Beal RT, Stephens RD, Williams RL (1998) Application of life cycle inventory analysis to fuel tank system design. Int J Life Cycle Assess 1:18–28

    Article  Google Scholar 

  • Koffler C (2007) Automobile Produkt-Ökobilanzierung. Institut WAR—Institut für Wasserversorgung und Grundwasserschutz, Abwassertechnik, Abfalltechnik, Industrielle Stoffkreisläufe, Umwelt- und Raumplanung. Technische Universität Darmstadt, Darmstadt

    Google Scholar 

  • Muñoz I, Rieradevall J, Domènech X, Gazulla C (2006) Using LCA to assess eco-design in the automotive sector. Int J Life Cycle Assess 11:323–334

    Article  Google Scholar 

  • Pflieger J, Fischer M, Stichling J, Eyerer P (2005) Magnesium in automotive lightweight design under life cycle aspects. In: Kainer KU (ed) Magnesium: proceedings of the 6th international conference magnesium alloys and their applications. Wiley-VCH Verlag, Weinheim, pp 962–967

    Google Scholar 

  • Ribeiro C, Ferreira JV, Partidário P (2007) Life cycle assessment of a multi-material car component. Int J Life Cycle Assess 5:336–345

    Article  Google Scholar 

  • Ridge L (1998) EUCAR—automotive LCA guidelines—phase 2, Total life cycle conference and exposition. Society of Automotive Engineers (SAE), Graz

    Google Scholar 

  • Rohde-Brandenburger K (1996) Verfahren zur einfachen und sicheren Abschätzung von Kraftstoffverbrauchspotentialen, Einfluss von Gesamtfahrzeugparametern auf Fahrzeugverhalten/Fahrleistung und Kraftstoffverbrauch. Haus der Technik, Essen

    Google Scholar 

  • Rohde-Brandenburger K, Obernolte J (2002) Wieviel Kraftstoff kosten 100 kg Mehrgewicht—Theoretische und experimentelle Untersuchungen. Interne Studie, Volkswagen AG, Wolfsburg

    Google Scholar 

  • Rohde-Brandenburger K, Obernolte J (2008) CO2-Potential durch Leichtbau im Pkw, DVM-Tag 2008—Leichtbaustrategien. Deutscher Verband für Materialforschung und -prüfung e.V, Berlin

    Google Scholar 

  • Ross M (1997) Fuel efficiency and the physics of automobiles. Contemp Phys 38:381–394

    Article  Google Scholar 

  • Saur K, Gediga J, Hesselbach J, Schuckert M, Eyerer P (1996) Life cycle assessment as an engineering tool in the automotive industry. Int J Life Cycle Assess 1:15–21

    Article  CAS  Google Scholar 

  • Schallaböck KO, Fischedick M, Brouns B, Luhmann H-J, Merten F, Ott HE, Pastowski A, Venjakob J (2006) Klimawirksame Emissionen des Pkw-Verkehrs und Bewertung von Minderungsstrategien. Wuppertal Spezial 34, Wuppertal Institut für Klima, Umwelt, Energie GmbH. Wuppertal, Germany

    Google Scholar 

  • Schmidt W-P, Dahlqvist E, Finkbeiner M, Krinke S, Lazzari S, Oschmann D, Pichon S, Thiel C (2004) Life cycle assessent of lightweight and end-of-life scenarios for generic compact class vehicles. Int J Life Cycle Assess 9:405–416

    Article  Google Scholar 

  • Schweimer GW, Levin M (2000) Sachbilanz des Golf A4. Volkswagen AG, Wolfsburg

    Google Scholar 

  • Schweimer GW, Schuckert M (1996) Sachbilanz eines Golf. In: VDI (Hrsg.), Ganzheitliche Betrachtungen im Automobilbau. Verein Deutscher Ingenieure (VDI) VDI-Bericht 1307, Wolfsburg

  • Subic A, Schiavone F (2006) Design-oriented application of LCA to an automotive system, 5th Australian Life Cycle Assessment Conference. Australian Life Cycle Assessment Society (ALCAS), Melbourne

  • Suzuki T, Takahashi J (2005) LCA of Lightweight Vehicles by Using CFRP for mass-produced vehicles, Fifteenth International Conference on Composite Materials, Durban, South Africa

  • Volkswagen AG (2007a) The Golf – Environmental Commendation. Volkswagen AG, Wolfsburg

    Google Scholar 

  • Volkswagen AG (2007b) The Passat – Environmental Commendation. Volkswagen AG, Wolfsburg

    Google Scholar 

  • Volkswagen AG (2008a) The DSG Dual-Clutch Gearbox - Environmental Commendation. Volkswagen AG, Wolfsburg

    Google Scholar 

  • Volkswagen AG (2008b) The Golf - Environmental Commendation. Volkswagen AG, Wolfsburg

    Google Scholar 

  • Volkswagen AG (2008c) Volkswagen Group Environmental Principles Products, Wolfsburg

  • Volkswagen AG (2009a) The Passat—environmental commendation. Volkswagen AG, Wolfsburg

    Google Scholar 

  • Volkswagen AG (2009b) The Polo – Environmental Commendation. Volkswagen AG, Wolfsburg

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Christoph Koffler.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Koffler, C., Rohde-Brandenburger, K. On the calculation of fuel savings through lightweight design in automotive life cycle assessments. Int J Life Cycle Assess 15, 128–135 (2010). https://doi.org/10.1007/s11367-009-0127-z

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11367-009-0127-z

Keywords

Navigation